The Process

The Process 2017-05-12T15:06:40+00:00

TRINCO PRESSURE CABINETS

Trinco Pressure Cabinets feature large dust collectors, heavy duty blast hose, tungsten carbide nozzles and heavy duty mixing valves.
Designed for speed, pressure cabinets produce high media velocities and volumes. You get 2-3 times the production speed with a pressure system as with a conventional suction system. The use of pressure tank force media through the blast hose rather than siphoning it, resulting in more efficient use of air and greater control of media flow.

These cabinets can be used with a wide selection of medias and pressure…pressures low enough to blast delicate parts and high enough to handle the most demanding cleaning and finishing operations. With pressure blasting, you get top performance at both ends of the pressure scale!

Air Requirements:

  • Cabinet lights for a DP850 & 900 RPC: 120Volts, 69 Watts
  • Motor: Dust Collector: 2HP, 230V, 1PH – 12AMPS
  • Cabinet lights for a 800 PT Dust Collector: 120Volts, 69 Watts
  • Motor: 800 PT Dust Collector: 1HP, 120V– 12AMPS

 

DIRECT PRESSURE BLASTING

In pressure blasting, a controlled quantity of media is pressurized by drawing through a special ASME pressure tank. It is joined by compressed air entering the system from your air compressor. The air and media mixture are then propelled together through a single hose to the nozzle at an extremely high rate of speed. The media is recovered and reclaimed for reuse. Broken down media and debris are removed and trapped in the dust collector.

  • Motor for a DP Dust Collector: 1HP, 120V, 8.5 AMPS
  • Motor for a 300 CFM Abrasive Separator: 1/2HP, 120V, 6 AMPS
  • Motor for a 400 PT Dust Collector: 1/2HP, 120V, 6 AMPS
  • Motor for a 600 CFM Abrasive Separator: 1HP, 120V, 12AMPS
  • Motor for a 800 PT Dust Collector: 1HP, 120V, 12AMPS
  • Cabinet Lights: 120 Volt, 46 watts

TECHNICAL INFO